Please consider supporting Energetic Forum with a voluntary monthly subscription. I have one question about the “McCoy” discharge. Solenoid and path integral. It works extremely well, but it also demonstrates an unusual phenomenon. Kelly This patent application covers a device which is claimed to have a substantially greater output.

Uploader: Akijinn
Date Added: 1 June 2004
File Size: 7.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 93259
Price: Free* [*Free Regsitration Required]

The other feature is the “timing.

Bedini SG the complete beginner’s handbook

Find all posts by Twexcom. Materials 20A Electricity How do you measure voltage and current in electric circuits? You will also need various tools, a soldering iron, some electrical solder and flux, bearings, a piece of beini grade shaft about 1 foot long, 24 1″ x 2″ x. This operation creates the primary “strain www. As the years went by, John realized that if he could get the energizer to turn itself, he could eliminate the electric motor and really simplify the system.

That means that interjediate distance between the coil and the wheel is one of the variables that contributes to the strength of that current.

Finally, he showed her how to wire everything together, and bedini sg the complete intermediate handbook solder the electronic components together so they would work properly. So, the voltage starts at “M” and will bedini sg the complete intermediate handbook a little bit as the charge starts.

What is important is that the wheel is perfectly round, well balanced, and rotating in a good set of bearings with low friction. Even so, once you have determined the exact placement positions for the magnets, they should be GLUED to the rim. I wanted to sincerely thank you for all your efforts to explain the work you did with John in a manner that makes sense.


Running the SG in Generator Mode seems to add a little electrical current to the otherwise low current spikes coming from the discharges of the Main Coil MC. In this project, we will consider this little voltage spike to be: She was showing how to power an “electric motor” and a little light LED from a battery in a way that, apparently, was NOT discharging the battery!

Again, this is the “top” of the coil. It is a must have for those who are just starting out and also for those who think they know it all… Best 27 dollars for enjoyment, I ever spent. So, the Bedini SG: Then, inI had the good fortune of working at his company. The Coil is the next major component, and possibly the most difficult to make. In a series of lecture on basic electronics, learning by doing, we now.

Shortly thereafter, John was “roughed-up” in his own shop and told he would “buy gasoline for the rest of his life, or else Meanwhile, the other magnet is approaching the generator coil, and is also being attracted to the small amount of iron there. This shows you how to convert the mechanical energy of the wheel into excess electrical energy. Why can’t people understand it? However, it has been determined that 7 strands of 20 wire and 1 strand of 23 wire actually works better, and is recommended.


BEDINI SG – The Complete Intermediate Handbook – Energetic Forum

The transistors are mounted on a sheet of aluminum with a thermal insulator between its back and the aluminum. The exact dimension of the wheel rim is 22 inches, measuring from the outside of the rim on one side to the outside of the rim on the other side.

The full instructions on all of the fine-tuning methods and energy gain tricks are in the second book titled Bedini SG, the Completer Intermediate Handbook.

John has purposefully ended the winding process with the cable vomplete the outer end of the spool. The battery appeared to have more energy in it than it was supposed to.

The switch was a simple toggle type. Originally Posted by Peter Lindemann. The first voltage drop indicates that the chemical changes we discussed earlier have started to happen. The Complete Advanced Handbook would not be complete unless this recent innovation was thoroughly explored and reported.

The current from the battery now forces the magnetic field in the iron to www. So, here is the complete schematic, as it is shown in the photo above: